GODESON 88702 Smart Color Coded Tire Tread Depth Gauge And GODESON Dual Head Tire Pressure Gauge, Heavy Duty Pencil Tire Gauge Range 10-150PSI

Why Choose GODESON Tire Tread Gauge? A professional tool worth having, UNIVERSAL FIT CARS AND TRUCKS Protect your vehicle Save your FUEL cost Enhance your driving ability The key reason should be repeated three times Keep you and your family safer,Keep you and your family safer,Keep you and your family safer Measure Tire Tread Depth 1. Push the measuring scale into the gauge as far as it will go. 2. Place the probe into the center of a circumferential tire groove and push down on the gauge's base. 3. Carefully remove gauge by holding its barrel (without touching the probe) and confirm the tread depth reading. 4. Place the probe into additional locations around the central circumferential tire groove at least 15 inches apart and repeat. 5. Place the probe into the inner and outer circumferential grooves and repeat. 6. Average all readings. 7. Identify the percentage of tire wear by confirming the tire's original/new tread depth in its specs compared to the remaining tread depth just measured. 8. If uneven tire wear is identified, have vehicle checked by a reputable tire specialist. Three Colors Coded Bar Make It Easy to Know Your Tire Situation The Tire Thread Depth Gauge is divided into Red,Yellow,Green ranges， Red：Dangerous Tire，need to be replaced, Yellow:Warning Tire,be careful when driving, need to be replaced when snowstorm,raining, Green: Safe tire 6 Sides Clear and Accurate Scale Marks;Quick and Easy Reading The tire tread gauge calibrated from 0 to 1 inch, reads in 32nds, and three color zones. Red range on bar: 0-3/32nds; Yellow Range on bar: 3/32 - 6/32nds ; Green Range on bar: 6/32-32/32nds, which provides accurate depth readings and allows for a quick and easy reading, Once you tried, you will be making an investment of a lifetime! Pocket Clip and Easy to Carry The car tire thread gauge has a small size with a metal pocket clip; It can be not only easy to clip on your pocket but also can be put into any tool case even though just very samll space left. Well Built and Damping Design This tire thread measure tool are are composed of a chrome-plated metal barrel,plasitc bar,pocket clip and metal probe with damping sliding design.